Micron P320h, 350GB Guide d'installation

Installation GuideUsing a P420m or P320h PCIe SSD as a Boot DriveIntroductionThis document provides instructions for deploying a Micron® P420m or P320

13. Create the / (root) partition on the /dev/rssdX device node, as well as any othermount points such as <swap>, /home, or /opt. If desired, cr

27. Complete the installation and reboot the system. Make sure you do not update thegrub package using Ubuntu updates.Citrix XenServer 6.1To use the P

Revision HistoryRev. A, 3/14• Initial release8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900www.micron.com/productsupport Cus

Ordering a Bootable DriveOnly P420m and P320h drives with the bootable option feature (bootable drives) can beused as boot devices. When ordering an S

Windows attempts to find the driver located on the USB drive.10. Select the Micron Device driver when prompted for a driver, and then click Next.11. R

8. Select Custom (advanced) when prompted for type of installation.9. When the installation directory prompt appears, select Load Driver and locate th

SUSE 11.x x64Before you begin, locate the appropriate ISO file you will need for the version of SUSEinstalled in the system. (This file is contained w

RHEL 6.x x641. Copy the P420m/P320h driver disk image from the support pack software to exter-nal removable media such as a USB drive.For example, for

• Press Ctrl+Alt+F6 to return to the GUI. Finish the installation by clickingReboot.Note: Steps 7 and 8 below apply only if your system is booting fro

Note: It is recommended to allocate at least 100GB for the swap size.The /dev/rssda1 partition should be created and appear in the Partition Lay-out s

Ubuntu 12.04–12.04.3 LTSNetwork connectivity and a USB drive are required for this procedure. Be aware that anydata on the USB drive is erased during